The One Cleaning Solution to NEVER Use On Your Large Outdoor Fountains

The One Cleaning Solution to NEVER Use On Your Large Outdoor Fountains It is essential to carefully maintain water fountains for them to function properly. One Cleaning Solution NEVER Use Large Outdoor Fountains 991883615734342621.jpg

One Cleaning Solution NEVER Use Large Outdoor Fountains 991883615734342621.jpg

A common concern with fountains is that they tend to gather dirt and debris, so it is vital that you keep it free from this. Also, algae is likely to build up wherever natural light meets water. Either sea salt, hydrogen peroxide, or vinegar can be blended into the water to eliminate this issue. Some people opt for putting bleach into the water, but the downside is that it harms wildlife - so it should be avoided.

No more than 3-4 months should really go by without an extensive cleaning of a fountain. Before you can start cleaning it you must drain out all of the water. Then use a soft rag and mild cleanser to scrub the inside. A useful tip is to use a toothbrush if there are little hard-to-reach spots. Be sure to thoroughly rinse the interior of the fountain to make sure all the soap is gone.

Various organisms and calcium deposits can get inside the pump, so it is advised to take it apart and clean it thoroughly. Soaking it in vinegar for a time will make it easier to scrub. If you want to eliminate build-up in your fountain, use rain water or mineral water rather than tap water, as these don’t contain any ingredients that might stick to the inside of the pump.

And finally, make sure the water level is continuously full in order to keep your fountain working optimally. Allowing the water to go below the pump’s intake level, can cause major damage and even make the pump burn out - an undesired outcome!

Gian Bernini's Outdoor Fountains

Gian Bernini's Outdoor Fountains There are many celebrated Roman fountains in its city center. One of the best ever sculptors and artists of the 17th century, virtually all of them were designed, conceived and constructed by Gian Lorenzo Bernini.

Also a city designer, he had capabilities as a fountain designer, and records of his life's work are noticeable throughout the avenues of Rome. A celebrated Florentine sculptor, Bernini's father guided his young son, and they eventually went to Rome to fully exhibit their artwork, chiefly in the form of public water features and water fountains. An outstanding employee, Bernin earned encouragement and the patronage of popes and well known painters. Originally he was renowned for his sculpting skills. He used his knowledge and melded it effortlessly with Roman marble, most notably in the Vatican. Though he was influenced by many, Michelangelo had the most profound impact on him, both personally and professionally.

Acqua Vergine: The Answer to Rome's Water Problems

Acqua Vergine: The Answer to Rome's Water Problems Previous to 273, when the 1st elevated aqueduct, Aqua Anio Vetus, was made in Rome, citizens who lived on hills had to go further down to get their water from natural sources. During this period, there were only 2 other techniques capable of offering water to elevated areas, subterranean wells and cisterns, which amassed rainwater. In the early 16th century, the city began to make use of the water that flowed below ground through Acqua Vergine to provide drinking water to Pincian Hill. Throughout the length of the aqueduct’s channel were pozzi, or manholes, that gave entry. The manholes made it easier to clean the channel, but it was also possible to use buckets to extract water from the aqueduct, as we discovered with Cardinal Marcello Crescenzi when he bought the property from 1543 to 1552, the year he passed away. He didn’t get sufficient water from the cistern that he had built on his property to obtain rainwater. To give himself with a more practical means to obtain water, he had one of the manholes opened up, giving him access to the aqueduct below his residence.

"Primitive" Greek Artwork: Large Statuary

"Primitive" Greek Artwork: Large Statuary The first freestanding sculpture was designed by the Archaic Greeks, a recognized accomplishment since until then the only carvings in existence were reliefs cut into walls and columns. Younger, attractive male or female (kore) Greeks were the subject matter of most of the sculptures, or kouros figures. Symbolizing beauty to the Greeks, the kouroi were designed to appear stiff and always had foot forward; the males were healthy, robust, and nude. The kouroi became life-sized commencing in 650 BC. The Archaic period was an awesome point of change for the Greeks as they extended into new forms of government, produced unique expressions of art, and achieved information of the people and cultures outside of Greece. Still, these conflicts did little to hinder the advancement of the Greek civilization.