The Origins of Modern Wall Fountains
The Origins of Modern Wall Fountains
The translation of hundreds of ancient Greek documents into Latin was commissioned by the scholarly Pope Nicholas V who led the Church in Rome from 1397 until 1455. In order to make Rome deserving of being the capital of the Christian world, the Pope decided to enhance the beauty of the city. At the behest of the Pope, the Aqua Vergine, a damaged aqueduct which had carried clean drinking water into Rome from eight miles away, was restored starting in 1453. Building a mostra, an imposing celebratory fountain built by ancient Romans to memorialize the entry point of an aqueduct, was a custom revived by Nicholas V. At the behest of the Pope, architect Leon Battista Alberti began the construction of a wall fountain in the spot where we now find the Trevi Fountain. The Trevi Fountain as well as the well-known baroque fountains located in the Piazza del Popolo and the Piazza Navona were eventually supplied with water from the altered aqueduct he had rebuilt.
The One Cleaning Solution to NEVER Use On Your Garden Water fountains
The One Cleaning Solution to NEVER Use On Your Garden Water fountains Adequate care and regular cleaning are important to the longevity of water fountains. It is essential to clean it out and remove any debris or foreign objects that might have dropped into or onto it. Additionally, anywhere light from the sun comes in contact with still water, algae can develop. Either sea salt, hydrogen peroxide, or vinegar can be dissolved into the water to avoid this issue. Another option is to stir bleach into the water, but this action can hurt wild animals and so should really be avoided. An extensive cleaning every 3-4 months is ideal for garden fountains. Before you start cleaning, all the water must be eliminated.
Next use gentle and a soft sponge to clean the interior of the reservoir. Feel free to use a toothbrush if helpful for any smaller crevasses. Do not leave any soap residue inside of or on the fountain.
Calcium and fresh water organisms can get inside the pump, so you should disassemble it to get it truly clean. You might want to let it soak in vinegar for a few hours to make it quicker to scrub. Neither rain water nor mineral water contain components that will collect inside the pump, so use either over tap water if possible.
One final trick for keeping your fountain in top working shape is to check the water level every day and make sure it is full. Allowing the water to reach below the pump’s intake level, can cause severe damage and even make the pump burn out - an undesired outcome!