Where did Large Outdoor Fountains Begin?
Where did Large Outdoor Fountains Begin? A water fountain is an architectural piece that pours water into a basin or jets it high into the air in order to provide drinkable water, as well as for decorative purposes.Pure functionality was the original purpose of fountains. Inhabitants of urban areas, townships and small towns used them as a source of drinking water and a place to wash up, which meant that fountains needed to be connected to nearby aqueduct or spring. Used until the nineteenth century, in order for fountains to flow or shoot up into the air, their origin of water such as reservoirs or aqueducts, had to be higher than the water fountain in order to benefit from the power of gravity. Serving as an element of decoration and celebration, fountains also supplied clean, fresh drinking water. Roman fountains often depicted images of animals or heroes made of bronze or stone masks. To replicate the gardens of paradise, Muslim and Moorish garden planners of the Middle Ages introduced fountains to their designs. The fountains found in the Gardens of Versailles were intended to show the power over nature held by King Louis XIV of France. The Popes of the 17th and 18th centuries were extolled with baroque style fountains built to mark the place of entry of Roman aqueducts.
Indoor plumbing became the key source of water by the end of the 19th century thereby restricting urban fountains to mere decorative elements. Fountains using mechanical pumps instead of gravity allowed fountains to provide recycled water into living spaces as well as create unique water effects.
Nowadays, fountains adorn public areas and are used to recognize individuals or events and fill recreational and entertainment needs.
Keeping Your Wall fountain Tidy
Keeping Your Wall fountain Tidy
No more than three-four months should go by without an extensive cleaning of a fountain. First off you must drain the water. When you have done this, wash inside the water reservoir with a mild detergent. If there are any small grooves, use a toothbrush to reach every spot. Make sure all the soap is properly cleaned off.
Calcium and fresh water organisms could get inside the pump, so you should really disassemble it to get it truly clean. Letting it soak in vinegar for several hours first will make it alot easier to clean. If you want to eliminate build-up in your fountain, use rain water or mineral water versus tap water, as these don’t contain any components that will stick to the inside of the pump.
One final tip for keeping your fountain in top working condition is to check the water level every day and make sure it is full. If the water level slides below the pump’s intake level, it can damage the pump and cause it to burn out - something you do not want to happen!