The One Cleaning Solution to NEVER Use On Your Garden Fountains
The One Cleaning Solution to NEVER Use On Your Garden Fountains Adequate care and regular cleaning are important to the longevity of water fountains. It is easy for foreign items to find their way into open-air fountains, so keeping it clean is vital. Also, algae tends to build up any place natural light meets water. Either sea salt, hydrogen peroxide, or vinegar can be blended into the water to avoid this issue. Bleach can also be dissolved into the water, but this is not an ideal option because it can hurt birds or other animals.
No more than 3-4 months should go by without an extensive cleansing of a fountain. The first task is to get rid of all of the water. Then use a soft rag and mild cleanser to scrub the inside. If there is detailed artwork, you might need to use a toothbrush for those hard-to-reach areas. Make sure all the soap is properly rinsed off.
Calcium and fresh water organisms can get inside the pump, so you should disassemble it to get it truly clean. Letting it soak in vinegar for a couple of hours first will make it much easier to clean. If you want to remove build-up in your fountain, use rain water or mineral water versus tap water, as these don’t contain any components that will stick to the inside of the pump.
Finally, be sure to have a quick look at your fountain every day and add water if you notice that the level is too low. Allowing the water to go below the pump’s intake level, can cause major damage and even make the pump burn out - an undesired outcome!
How Your Home or Office Profit from an Indoor Wall Water Feature

While sitting below your wall fountain you can indulge in the tranquility it provides after a long day's work and enjoy watching your favorite sporting event. The rewards of an indoor water feature include its ability to release negative ions with its gentle sounds and clear away dust and pollen from the air while creating a calming environment.
Your Garden: The Perfect Spot for a Wall Fountain
Your Garden: The Perfect Spot for a Wall Fountain A great way to enhance the look of your outdoor living area is to add a wall water feature or an exterior garden fountain to your landscaping or garden design.
Putting in a wall water feature is your best option for a little patio area because a spouting or cascading fountain occupies too much space. Two options to choose from include either a freestanding type with an even back set against a fence or wall in your garden, or a wall-mounted, self-contained type which is suspended on a wall. Adding a fountain to an existing wall requires that you include a fountain mask as well as a basin at the bottom to gather the water. Since the plumbing and masonry work is extensive to complete this type of job, you should employ a professional to do it rather than attempt to do it alone.