The One Cleaning Solution to NEVER Use On Your Outdoor Wall Fountains
The One Cleaning Solution to NEVER Use On Your Outdoor Wall Fountains Water fountains will keep working a long time with regular cleaning and maintenance. It is essential to clean it out and remove any debris or foreign objects that might have gotten into or onto it. Additionally, anywhere light from the sun mixes with still water, algae can appear. Either sea salt, hydrogen peroxide, or vinegar can be dissolved into the water to avoid this issue. Another option is to stir bleach into the water, but this action can hurt wild animals and so should really be avoided.Every three-four months, garden fountains should go through a good cleaning. To start with you must remove the water. When you have done this, wash inside the water reservoir with a mild detergent. A helpful tip is to use a toothbrush if there are small hard-to-reach spots. Do not leave any soap deposits inside or on the fountain.
Make sure you get rid of any calcium or plankton by taking the pump apart and scrubbing the inside carefully. Soaking it in vinegar for a time will make it easier to wash. Neither rain water nor mineral water contain components that will accumulate inside the pump, so use either over tap water if possible.
Finally, be sure to have a quick look at your fountain every day and add water if you see that the level is too low. Allowing the water to drop below the pump’s intake level, can cause major damage and even make the pump burn out - an undesired outcome!