At What Point Did Water Fountains Originate?
At What Point Did Water Fountains Originate? Himself a highly educated man, Pope Nicholas V led the Roman Catholic Church from 1397 till 1455 and was responsible for the translation of hundreds of age-old texts from their original Greek into Latin.
In order to make Rome deserving of being the capital of the Christian world, the Pope decided to embellish the beauty of the city. In 1453 the Pope commissioned the reconstruction of the Aqua Vergine, an historic Roman aqueduct which had carried clean drinking water into the city from eight miles away. The ancient Roman custom of building an imposing commemorative fountain at the location where an aqueduct arrived, also known as a mostra, was resurrected by Nicholas V. At the bidding of the Pope, architect Leon Battista Alberti began the construction of a wall fountain in the spot where we now find the Trevi Fountain. Modifications and extensions, included in the restored aqueduct, eventually provided the Trevi Fountain and the well-known baroque fountains in the Piazza del Popolo and Piazza Navona with the necessary water supply.
The One Cleaning Solution to NEVER Use On Your Large Outdoor Fountains
The One Cleaning Solution to NEVER Use On Your Large Outdoor Fountains It is vital to carefully maintain water fountains for them to work properly. A typical problem with fountains is that they tend to collect dirt and debris, so it is essential that you keep it free from this. Additionally, anywhere light from the sun combines with still water, algae can appear.
To avoid this, take vinegar, hydrogen peroxide, or sea salt and add right into the water. Some people opt for adding bleach into the water, but the downside is that it harms wildlife - so it should be avoided. An extensive cleaning every 3-4 months is ideal for garden fountains. First you must empty the water. Next use gentle and a soft sponge to clean inside the reservoir. A good tip is to use a toothbrush if there are little hard-to-reach spots. Do not leave any soap residue in or on the fountain.
Calcium and fresh water organisms can get inside the pump, so you should really disassemble it to get it truly clean. Soaking it in vinegar for a time will make it easier to wash. Neither rain water nor mineral water contain components that will accumulate inside the pump, so use either over tap water if possible.
One final trick for keeping your fountain in top working condition is to check the water level every day and make sure it is full. Allowing the water to go below the pump’s intake level, can cause major damage and even make the pump burn out - an undesired outcome!
Water Delivery Strategies in Historic Rome
Water Delivery Strategies in Historic Rome Aqua Anio Vetus, the first raised aqueduct assembled in Rome, began providing the men and women living in the hills with water in 273 BC, even though they had depended on natural springs up till then. If people living at higher elevations did not have access to springs or the aqueduct, they’d have to rely on the remaining existing technologies of the day, cisterns that gathered rainwater from the sky and subterranean wells that received the water from under ground. In the early 16th century, the city began to make use of the water that flowed below the ground through Acqua Vergine to furnish drinking water to Pincian Hill. During the length of the aqueduct’s route were pozzi, or manholes, that gave access. Though they were primarily planned to make it possible to support the aqueduct, Cardinal Marcello Crescenzi began using the manholes to accumulate water from the channel, commencing when he obtained the property in 1543. He didn’t get a sufficient quantity of water from the cistern that he had constructed on his property to collect rainwater. To provide himself with a more streamlined way to obtain water, he had one of the manholes opened, providing him access to the aqueduct below his residence.