Outdoor Wall Fountains: The Numerous Styles Available
Outdoor Wall Fountains: The Numerous Styles Available Wall fountains are well suited to small verandas or gardens because they do not take up too much space while also adding a touch of flair and providing a great place to find peace and quiet. Traditional, antique, contemporary, or Asian are just some of the styles you can pick from when looking for an outdoor wall fountain to your liking. It is possible to have one custom-made if you are not able to find a pre-assembled fountain to suit you.Depending on your wishes, you can pick from mounted or freestanding types. You can hang a mounted wall fountain because they are small and self-contained. One of the most important features of wall fountains is that they be lightweight, so they are normally made of fiberglass or resin to replicate the look of stone. In large free-standing fountains, otherwise referred to as wall fountains, the basin is set on the ground with the flat side positioned against a wall. There are no weight limits on these kinds of cast stone water features.
Custom-made fountains which can be incorporated into a new or existing wall are often prescribed by landscaping designers. The basin and all the required plumbing are best installed by a qualified mason. The wall will need to have a spout or fountain mask built into it. A custom-built wall fountain blends into the landscape instead of standing out because it was a later addition, which adds to a cohesive look.
Keep Your Outdoor Fountain Clean

A thorough cleaning every 3-4 months is recommended for garden fountains. Before cleaning, all of the water must be taken out. When you have done this, scrub inside the water reservoir with a gentle detergent. If there is intricate artwork, you might need to use a toothbrush for those hard-to-reach areas. Any soap residue left on your fountain can damage it, so be sure it is all rinsed off.
It is highly recommended taking the pump apart to better clean the inside and eliminate any plankton or calcium. Letting it soak in vinegar for a couple of hours first will make it much easier to clean. Neither rain water nor mineral water contain ingredients that will collect inside the pump, so use either over tap water if possible.
Lastly, make sure your fountain is always full by looking at it every day - this will keep it in tip-top condition. If the water level drops below the pump’s intake level, it can hurt the pump and cause it to burn out - something you don't want to happen!