The History of Garden Fountains
The History of Garden Fountains The translation of hundreds of classical Greek texts into Latin was commissioned by the learned Pope Nicholas V who led the Church in Rome from 1397 till 1455. In order to make Rome worthy of being the capital of the Christian world, the Pope resolved to enhance the beauty of the city.
At the behest of the Pope, the Aqua Vergine, a ruined aqueduct which had transported clean drinking water into Rome from eight miles away, was renovated starting in 1453. The ancient Roman tradition of building an imposing commemorative fountain at the point where an aqueduct arrived, also known as a mostra, was restored by Nicholas V. The Trevi Fountain now occupies the area formerly filled with a wall fountain crafted by Leon Battista Albert, an architect commissioned by the Pope. The Trevi Fountain as well as the renowned baroque fountains located in the Piazza del Popolo and the Piazza Navona were eventually supplied with water from the altered aqueduct he had rebuilt.
Outdoor Wall Fountains: The Many Designs Available
Outdoor Wall Fountains: The Many Designs Available Wall fountains are well suited to little patios or gardens because they do not require too much space while also adding a bit of flair and providing a great place to find peace and quiet. When looking at the many types of outdoor wall fountains available including traditional, vintage, modern, or Asian, you are certain to find one most suitable to your design ideas.
While there are innumerable prefabricated ones on the market, you may need a custom-built fountain if none of these are appealing to you. Mounted and free-standing fountains are readily available on the market. Small, self-contained mounted wall fountains can be hung on any surface. Normally made of resin (to look like stone) or fiber glass, these kinds of fountains are lightweight and easy to hang. In large free-standing fountains, otherwise referred to as wall fountains, the basin is located on the ground with the smooth side positioned against a wall. Water features such as these are usually manufactured of cast stone and have no weight limitations.
Many qualified landscapers prefer custom-built fountains which can be incorporated into a brand-new wall or an existing one. The basin and all the required plumbing are best installed by a qualified mason. The wall will have to have a spout or fountain mask built into it. The cohesive look produced by custom-made wall fountains make them appear to be part of the scenery instead of an afterthought.
Keeping Your Garden Fountain Clean
Keeping Your Garden Fountain Clean Adequate care and regular cleaning are important to the longevity of water fountains. It is essential to clean it out and take out any debris or foreign elements that might have fallen into or onto it.
Additionally, anywhere light from the sun mixes with still water, algae can appear. To prevent this, take vinegar, hydrogen peroxide, or sea salt and add right into the water. Another option is to stir bleach into the water, but this action can hurt wild animals and so should really be avoided. A thorough cleaning every 3-4 months is recommended for garden fountains. Prior to cleaning, all of the water must be taken out. Then use a soft rag and gentle cleanser to scrub the inside. If there is delicate artwork, you might need to use a toothbrush for those hard-to-reach areas. Any soap residue left on your fountain can harm it, so be sure it is all rinsed off.
Make sure you get rid of any calcium or plankton by taking the pump apart and washing the inside properly. Soaking it in vinegar for a bit will make it easier to wash. Mineral or rain water, versus tap water, is ideal in order to eliminate any build-up of chemicals inside the pump.
One final trick for keeping your fountain in top working order is to check the water level every day and make sure it is full. Allowing the water level to get too low can cause damage to the pump - and you certainly don't want that!