Discover Serenity with Outdoor Fountains

Water Transport Strategies in Ancient Rome
Water Transport Strategies in Ancient Rome With the building of the 1st elevated aqueduct in Rome, the Aqua Anio Vetus in 273 BC, folks who lived on the city’s foothills no longer had to be dependent entirely on naturally-occurring spring water for their needs. Throughout this time period, there were only two other systems capable of supplying water to higher areas, subterranean wells and cisterns, which accumulated rainwater. From the early sixteenth century, water was routed to Pincian Hill via the underground channel of Acqua Vergine. As originally constructed, the aqueduct was provided along the length of its channel with pozzi (manholes) constructed at regular intervals. While these manholes were provided to make it less difficult to preserve the aqueduct, it was also feasible to use buckets to remove water from the channel, which was done by Cardinal Marcello Crescenzi from the time he purchased the property in 1543 to his death in 1552. Whilst the cardinal also had a cistern to collect rainwater, it couldn't produce sufficient water. Through an orifice to the aqueduct that flowed under his property, he was set to satisfy his water wants.Use a Fountain To Help Improve Air Quality
Use a Fountain To Help Improve Air Quality You can animate your living area by putting in an indoor wall fountain. Your senses and your wellness can benefit from the installation of one of these indoor features. The science behind this theory supports the fact that water fountains can positively impact your health. The negative ions released by water features are countered by the positive ions released by present-day conveniences. The negative ions created by these kinds of water features overtake the positive ones resulting in positive shifts to both your mental and physical health. A rise in serotonin levels is experienced by those who have one of these water features making them more alert, peaceful and lively.
Exterior Wall Fountains: The Many Designs on the Market

The two kinds of water features available to you include mounted and freestanding models. Small, self-contained mounted wall fountains can be installed on any surface. Wall fountains made of resin ( similar to stone) or fiberglass are typically light so they can be easily hung. In large stand-alone fountains, otherwise known as wall fountains, the basin is located on the ground with the flat side positioned against a wall. Typically made of cast stone, these water features have no weight limitations.
It is a good idea to integrate a custom-made fountain into a new or existing wall, something often suggested by landscape experts. A expert mason is required to place the water basin against the wall and properly install all the plumbing inside or behind the wall. It is also necessary to add a spout or fountain mask to build it into the wall. A custom-built wall fountain blends into the landscape instead of standing out because it was a later addition, which contributes to a unified appearance.