Your Garden: An Ideal Place for a Fountain
Your Garden: An Ideal Place for a Fountain The area outside your residence can be polished up by including a wall or a garden fountain to your landscaping or garden project. A myriad of current designers and fountain craftsmen have found ideas in the fountains and water features of the past. As such, integrating one of these to your interior is a superb way to connect it to the past. Among the many attributes of these beautiful garden fountains is the water and moisture they discharge into the air which attracts birds and other wild life as well as helps to balance the ecosystem. For example, birds attracted by a fountain or birdbath can be useful because they fend off bothersome flying insects.The space required for a cascading or spouting fountain is substantial, so a wall fountain is the ideal size for a small yard.
You can choose to set up a stand-alone fountain with a flat back and an attached basin propped against a fence or wall in your backyard, or a wall-mounted type which is self-contained and suspended from a wall. Adding a fountain to an existent wall requires that you include a fountain mask as well as a basin at the bottom to collect the water. Be sure to work with a professional for this type of job since it is better not to do it yourself due to the intricate plumbing and masonry work involved.
Keep Your Landscape Fountain Tidy
Keep Your Landscape Fountain Tidy Water fountains will keep working a very long time with routine cleaning and maintenance. Leaves, twigs, and bugs often find their way into fountains, so it is vital to keep yours free from such debris.
Additionally, anywhere light from the sun combines with still water, algae can develop. Either sea salt, hydrogen peroxide, or vinegar can be dissolved into the water to eliminate this problem. Another option is to mix bleach into the water, but this action can harm wild animals and so should really be avoided. Experts advise that the typical garden fountain undergoes a thorough cleaning every 3-4 months. Before you can start washing it you must drain out all of the water. When you have done this, scrub inside the water reservoir with a gentle detergent. If there is delicate artwork, you might need to use a toothbrush for those hard-to-reach areas. Be sure to carefully rinse the interior of the fountain to make sure all the soap is gone.
It is highly suggested taking the pump apart to better clean the inside and eliminate any plankton or calcium. Soaking it in vinegar for a bit will make it easier to clean. If you want to minimize build-up in your fountain, use rain water or mineral water versus tap water, as these don’t contain any components that might stick to the inside of the pump.
Lastly, make sure your fountain is always full by checking it every day - this will keep it in tip-top condition. Low water levels can ruin the pump - and you don't want that!