Early Water Supply Techniques in Rome
Early Water Supply Techniques in Rome
The City Of Rome, Gian Lorenzo Bernini, And Water Fountains
The City Of Rome, Gian Lorenzo Bernini, And Water Fountains There are countless celebrated water features in the city center of Rome. Practically all of them were designed, conceived and constructed by one of the greatest sculptors and designers of the 17th century, Gian Lorenzo Bernini. Traces of his life's work are obvious throughout the roads of Rome because, in addition to his abilities as a water feature designer, he was also a city builder.
The One Cleaning Solution to NEVER Use On Your Garden Fountains
The One Cleaning Solution to NEVER Use On Your Garden Fountains Appropriate care and regular cleaning are important to the longevity of water fountains. It is important to clean it out and get rid of any debris or foreign elements that might have dropped into or onto it. Also, algae has a tendency to build up anywhere natural light meets water. Either sea salt, hydrogen peroxide, or vinegar can be blended into the water to prevent this issue. Another option is to stir bleach into the water, but this action can harm wild animals and so should really be avoided. A complete cleaning every three-four months is best for garden fountains. Before you can start washing it you must empty out all of the water. Then use a soft towel and mild cleanser to scrub the inside. Feel free to use a toothbrush if needed for any smaller crevasses. Do not leave any soap deposits inside or on the fountain.
It is highly recommended taking the pump apart to better clean the inside and remove any plankton or calcium. To make it less strenuous, soak it in vinegar for a while before cleaning. If you want to eliminate build-up in your fountain, use rain water or mineral water versus tap water, as these don’t contain any ingredients that might stick to the inside of the pump.
Finally, be sure to have a quick look at your fountain daily and add water if you notice that the level is too low. Low water levels can damage the pump - and you don't want that!