Installation and Maintenance of Large Outdoor Fountains
Installation and Maintenance of Large Outdoor Fountains A very important first step is to consider the size of the outdoor wall fountain with regards to the area you have available for it. It will require a very strong wall to support its total weight. Therefore for smaller areas or walls, a more lightweight feature is going to be more appropriate. You will need to have an electrical socket in the vicinity of the fountain so it can be powered. There are many different models of fountains, each with their own set of simple, step-by-step directions.
Most outside wall fountains are available in "for-dummies" style kits that will give you all you need to properly install it. A submersible pump, hoses and basin, or reservoir, are included in the kit. Depending on its size, the basin can normally be hidden quite easily amongst the plants. Once fitted, wall fountains typically only require some light maintenance and regular cleaning.
Replace and clean the water on a regular basis. Debris such as branches, leaves or dirt should be cleaned up quickly. Protecting your outdoor wall fountain from the cold winter climate is essential. In order to avoid any damage, such as cracking, from freezing water during the cold winter season, relocate your pump indoors. Simply put, your outdoor fountain will be a part of your life for many years with the correct care and maintenance.
Acqua Vergine: The Answer to Rome's Water Problems
Acqua Vergine: The Answer to Rome's Water Problems Aqua Anio Vetus, the first raised aqueduct founded in Rome, started delivering the people living in the hills with water in 273 BC, although they had counted on natural springs up till then.
When aqueducts or springs weren’t easily accessible, people dwelling at greater elevations turned to water taken from underground or rainwater, which was made available by wells and cisterns. In the very early 16th century, the city began to use the water that ran beneath the earth through Acqua Vergine to furnish drinking water to Pincian Hill. Through its initial building and construction, pozzi (or manholes) were added at set intervals alongside the aqueduct’s channel. While these manholes were developed to make it simpler and easier to maintain the aqueduct, it was also feasible to use containers to pull water from the channel, which was carried out by Cardinal Marcello Crescenzi from the time he purchased the property in 1543 to his passing in 1552. The cistern he had built to gather rainwater wasn’t satisfactory to meet his water specifications. Thankfully, the aqueduct sat under his property, and he had a shaft opened to give him access.