Keep Your Large Garden Fountains Tidy

Experts advise that the typical garden fountain undergoes a thorough cleaning every three-four months. Before cleaning, all the water must be eliminated. Then use a soft rag and gentle cleanser to scrub the inside. If there is detailed artwork, you might need to use a toothbrush for those hard-to-reach areas. Do not leave any soap residue inside of or on the fountain.

Make sure you get rid of any calcium or plankton by taking the pump apart and scrubbing the inside properly. Letting it soak in vinegar for several hours first will make it much easier to clean. Mineral or rain water, versus tap water, is ideal in order to eliminate any build-up of chemicals inside the pump.

Finally, be sure to have a quick look at your fountain daily and add water if you see that the level is low. If the water level drops below the pump’s intake level, it can hurt the pump and cause it to burn out - something you don't want to happen!

The Myriad Styles of Wall Fountains

There are two distinct styles of fountains you can buy: mounted and stand-alone. Mounted wall fountains are little and self-contained versions which can be placed on a wall. One of the most important aspects of wall fountains is that they be light, so they are normally made of fiberglass or resin to replicate the look of stone. Free-standing fountains, often referred to as floor fountains, are sizable, have a basin located on the ground and a smooth side which leans against a wall. There are no weight restrictions on these sorts of cast stone water features.

It is a good idea to integrate a custom-made fountain into a new or existing wall, something often recommended by landscape experts. The basin and all the required plumbing are best installed by a qualified mason. You will need to integrate a spout or fountain mask into the wall. If you want a cohesive look for your garden, buy a customized wall fountain because it becomes part of the scenery rather than an afterthought.

The Various Construction Materials of Large Outdoor Fountains

Presently, copper is very common for sculptural garden fountains. Copper is trendy for both inside and outside use and is widely found in tabletop and cascade fountains, among others. Copper is also flexible enough that you can pick a range of styles for your fountain, from contemporary to whimsical.

Brass water fountains are also popular, though they tend to have a more traditional look than copper ones. Brass fountains are often designed with interesting artwork, so they are popular even if they are a bit conventional.

Of all the metals, stainless steel is seen as the most contemporary-looking. If you select a cutting-edge steel design, both the value and tranquility of your garden will get a nice bump. As with most fountains, they are available in numerous sizes.

For people who want the look of a metal fountain but desire a lighter weight and more affordable option, fiberglass is the answer. Keeping a fiberglass water fountain clean and working properly is quite effortless, another aspect consumers like.