"Old School" Fountain Manufacturers
"Old School" Fountain Manufacturers Multi-talented people, fountain artists from the 16th to the late 18th century often served as architects, sculptors, artists, engineers and cultivated scholars all in one.
Where did Large Outdoor Fountains Begin?
Where did Large Outdoor Fountains Begin? A water fountain is an architectural piece that pours water into a basin or jets it high into the air in order to supply drinkable water, as well as for decorative purposes.The primary purpose of a fountain was originally strictly practical. Inhabitants of cities, townships and small towns used them as a source of drinking water and a place to wash, which meant that fountains needed to be connected to nearby aqueduct or spring. Up until the 19th century, fountains had to be more elevated and closer to a water source, such as aqueducts and reservoirs, in order to take advantage of gravity which fed the fountains. Acting as an element of adornment and celebration, fountains also supplied clean, fresh drinking water. The main materials used by the Romans to build their fountains were bronze or stone masks, mostly depicting animals or heroes. To depict the gardens of paradise, Muslim and Moorish garden planners of the Middle Ages introduced fountains to their designs. Fountains played a considerable role in the Gardens of Versailles, all part of French King Louis XIV’s desire to exert his power over nature. The Romans of the 17th and 18th centuries created baroque decorative fountains to glorify the Popes who commissioned them as well as to mark the spot where the restored Roman aqueducts entered the city.
The end of the nineteenth century saw the rise in usage of indoor plumbing to supply drinking water, so urban fountains were relegated to strictly decorative elements. Gravity was replaced by mechanical pumps in order to permit fountains to bring in clean water and allow for beautiful water displays.
Nowadays, fountains adorn public areas and are used to recognize individuals or events and fill recreational and entertainment needs.
The Earliest Public Garden Fountains
The Earliest Public Garden Fountains As initially developed, fountains were designed to be functional, guiding water from creeks or reservoirs to the inhabitants of cities and settlements, where the water could be used for cooking, cleaning, and drinking. A supply of water higher in elevation than the fountain was necessary to pressurize the movement and send water spraying from the fountain's spout, a system without equal until the late 19th century.
The One Cleaning Solution to NEVER Use On Your Wall Water Fountains
The One Cleaning Solution to NEVER Use On Your Wall Water Fountains
Experts suggest that the typical garden fountain undergoes a thorough cleaning every three-four months. First you must empty the water. Then use mild soap and a soft sponge to clean inside the reservoir. Feel free to use a toothbrush if needed for any smaller crevasses. Do not leave any soap deposit inside or on the fountain.
Calcium and fresh water organisms could get inside the pump, so you should disassemble it to get it truly clean. You might want to let it soak in vinegar for a few hours to make it much less difficult to scrub. Build-up can be a big headache, so use mineral or rain water over tap water, when possible, to reduce this dilemma.
Lastly, make sure your fountain is always full by checking on it every day - this will keep it in tip-top shape. Low water levels can damage the pump - and you do not want that!