Your Garden: The Perfect Place for a Fountain
Your Garden: The Perfect Place for a Fountain The area outside your residence can be enhanced by adding a wall or a garden fountain to your landscaping or garden project. Historical fountains and water features have sparked the interest of contemporary designers as well as fountain manufacturers. As such, the effect of integrating one of these to your home decor bridges it to past times. Among the many attributes of these beautiful garden water features is the water and moisture they release into the air which attracts birds and other wild life as well as helps to balance the ecosystem. For example, birds attracted by a fountain or birdbath can be useful because they fend off bothersome flying insects.Wall fountains are a good choice if your yard is small because they do not require much space in comparison to a spouting or cascading fountain. You can choose to put in a stand-alone fountain with a flat back and an connected basin propped against a fence or wall in your backyard, or a wall-mounted type which is self-contained and suspended from a wall. Adding a fountain to an existent wall requires that you include a fountain mask as well as a basin at the bottom to collect the water. The plumbing and masonry work necessary for this type of job requires know-how, so it is best to employ a skilled person rather than go at it yourself.
The One Cleaning Solution to NEVER Use On Your Garden Water fountains

A complete cleaning every 3-4 months is ideal for garden fountains. Before you can start cleaning it you must drain out all of the water. Then use mild soap and a soft sponge to clean inside the reservoir. If there are any small grooves, use a toothbrush to get each and every spot. Make sure all the soap is properly washed off.
Calcium and fresh water organisms can get inside the pump, so you should really disassemble it to get it truly clean. You might want to let it soak in vinegar for a few hours to make it much less difficult to scrub. Build-up can be a big headache, so use mineral or rain water over tap water, when possible, to reduce this dilemma.
Finally, be sure to have a quick look at your fountain every day and add water if you notice that the level is low. If the water level falls below the pump’s intake level, it can harm the pump and cause it to burn out - something you don't want to happen!