Where did Large Garden Fountains Originate from?
Where did Large Garden Fountains Originate from? A water fountain is an architectural piece that pours water into a basin or jets it high into the air in order to provide drinkable water, as well as for decorative purposes.The main purpose of a fountain was originally strictly practical. People in cities, towns and villages received their drinking water, as well as water to bathe and wash, from aqueducts or springs nearby. Until the late 19th, century most water fountains operated using the force of gravity to allow water to flow or jet into the air, therefore, they needed a source of water such as a reservoir or aqueduct located higher than the fountain. Fountains were an optimal source of water, and also served to adorn living areas and celebrate the artist. Bronze or stone masks of wildlife and heroes were frequently seen on Roman fountains. During the Middle Ages, Muslim and Moorish garden planners included fountains to create mini depictions of the gardens of paradise. To demonstrate his prominence over nature, French King Louis XIV included fountains in the Garden of Versailles. The Popes of the 17th and 18th centuries were extolled with baroque style fountains constructed to mark the place of entry of Roman aqueducts.
Since indoor plumbing became the norm of the day for clean, drinking water, by the end of the 19th century urban fountains were no longer needed for this purpose and they became purely ornamental. Impressive water effects and recycled water were made possible by replacing the force of gravity with mechanical pumps.
Nowadays, fountains adorn public spaces and are used to recognize individuals or events and fill recreational and entertainment needs.
The One Cleaning Solution to NEVER Use On Your Large Outdoor Fountains
The One Cleaning Solution to NEVER Use On Your Large Outdoor Fountains In order to ensure that water fountains last a long time, it is vital to practice regular maintenance.
An extensive cleaning every three-four months is best for garden fountains. Prior to cleaning, all the water must be eliminated. Next use mild soap and a soft sponge to clean the interior of the reservoir. If there is delicate artwork, you might need to use a toothbrush for those hard-to-reach areas. Any soap residue remaining on your fountain can harm it, so be sure it is all rinsed off.
It is highly recommended taking the pump apart to better clean the inside and eliminate any plankton or calcium. You might want to let it soak in vinegar for a few hours to make it much less difficult to clean. Neither rain water nor mineral water contain substances that will accumulate inside the pump, so use either over tap water if possible.
Finally, be sure to have a quick look at your fountain daily and add water if you see that the level is low. Low water levels can damage the pump - and you don't want that!