The One Cleaning Solution to NEVER Use On Your Fountains

A thorough cleaning every three-four months is ideal for garden fountains. Before cleaning, all the water must be removed. Then use a soft rag and mild cleanser to scrub the inside. If there is intricate artwork, you might need to use a toothbrush for those hard-to-reach areas. Be sure to completely rinse the interior of the fountain to make sure all the soap is gone.
Make sure you get rid of any calcium or plankton by taking the pump apart and washing the inside properly. To make it less strenuous, soak it in vinegar for several hours before cleaning. If you want to minimize build-up in your fountain, use rain water or mineral water versus tap water, as these don’t contain any elements that will stick to the inside of the pump.
Finally, be sure to have a quick look at your fountain every day and add water if you notice that the level is low. Allowing the water to reach below the pump’s intake level, can cause serious damage and even make the pump burn out - an undesired outcome!
Fountains And Their Use In Minoa
Fountains And Their Use In Minoa A variety of sorts of conduits have been unveiled through archaeological digs on the island of Crete, the birthplace of Minoan civilization. These supplied water and removed it, including water from waste and storms. The primary ingredients used were rock or terracotta. Anytime clay was chosen, it was usually for waterways as well as water pipes which came in rectangular or circular shapes. These included cone-like and U-shaped terracotta piping which were distinctive to the Minoans. Terracotta pipes were utilized to distribute water at Knossos Palace, running up to three meters beneath the floor surfaces. The pipes also had other uses including amassing water and directing it to a main area for storing.