The One Cleaning Solution to NEVER Use On Your Outdoor Garden Fountains
The One Cleaning Solution to NEVER Use On Your Outdoor Garden Fountains It is vital to carefully maintain water fountains for them to function optimally. Leaves, twigs, and insects often find their way into fountains, so it is vital to keep yours free from such debris. Additionally, anywhere light from the sun combines with still water, algae can appear. To prevent this, there are some basic ingredients that can be mixed into the water, such as vinegar, sea salt, or hydrogen peroxide. Some people opt for adding bleach into the water, but the downside is that it harms wildlife - so it should be avoided.
Experts advise that the typical garden fountain undergoes a thorough cleaning every three-four months. The first task is to get rid of all the water. When you have done this, wash inside the water reservoir with a mild detergent. A good tip is to use a toothbrush if there are little hard-to-reach spots. Be sure to thoroughly rinse the inner surface of the fountain to make sure all the soap is gone.
It is highly advised taking the pump apart to better clean the inside and get rid of any plankton or calcium. Letting it soak in vinegar for a couple of hours first will make it alot easier to clean. If you want to remove build-up in your fountain, use rain water or mineral water versus tap water, as these don’t contain any components that will stick to the inside of the pump.
Finally, be sure to have a quick look at your fountain daily and add water if you see that the level is low. Allowing the water level to get too low can cause damage to the pump - and you certainly don't want that!