The One Cleaning Solution to NEVER Use On Your Garden Fountains
The One Cleaning Solution to NEVER Use On Your Garden Fountains Water fountains will last a very long time with scheduled cleaning and maintenance. It is important to clean it out and take out any debris or foreign elements that might have dropped into or onto it. Another factor is that water that is exposed to sunlight is vulnerable to growing algae. Either sea salt, hydrogen peroxide, or vinegar can be mixed into the water to prevent this problem.
Experts advise that the typical garden fountain undergoes a thorough cleaning every 3-4 months. Prior to cleaning, all of the water must be taken out. Then use a soft rag and gentle cleanser to scrub the inside. Feel free to use a toothbrush if needed for any smaller crevasses. Make sure all the soap is properly cleaned off.
Calcium and fresh water organisms can get inside the pump, so you should really disassemble it to get it truly clean. You might want to let it soak in vinegar for a few hours to make it much less difficult to wash. Build-up can be a big hassle, so use mineral or rain water over tap water, when possible, to prevent this dilemma.
Finally, be sure to have a quick look at your fountain every day and add water if you see that the level is too low. Permitting the water level to get too low can result in damage to the pump - and you certainly do not want that!
Bernini: The Genius Behind Italy's Most Impressive Fountains
