A Concise History of Early Water Fountains
A Concise History of Early Water Fountains Water fountains were originally practical in function, used to bring water from canals or springs to cities and hamlets, providing the residents with fresh water to drink, wash, and prepare food with. A supply of water higher in elevation than the fountain was necessary to pressurize the flow and send water spraying from the fountain's nozzle, a system without equal until the late 19th century. The splendor and wonder of fountains make them ideal for historic memorials. The contemporary fountains of modern times bear little likeness to the very first water fountains.
Created for drinking water and ceremonial purposes, the very first fountains were basic carved stone basins. The first stone basins are suspected to be from about 2000 B.C.. The jet of water emerging from small jets was pushed by gravity, the sole power source builders had in those days. Situated near reservoirs or creeks, the functional public water fountains supplied the local citizens with fresh drinking water. Fountains with ornate decoration started to appear in Rome in about 6 BC, usually gods and creatures, made with natural stone or copper-base alloy. The Romans had an elaborate system of aqueducts that supplied the water for the many fountains that were located throughout the community.
Keeping Your Wall fountain Tidy
Keeping Your Wall fountain Tidy Water fountains will last a long time with routine cleaning and maintenance. It is easy for foreign items to find their way into outside fountains, so keeping it clean is vital. On top of that, algae can be a problem, because sunshine hitting the water permits it to form quickly. Mix hydrogen peroxide, sea salt, or vinegar into the water to avoid this particular problem. There are those who like to use bleach, but that is hazardous to any animals that might drink or bathe in the water - so should therefore be avoided.Experts recommend that the typical garden fountain undergoes a thorough scrubbing every three-four months. Prior to cleaning, all the water must be taken out.
Next use mild soap and a soft sponge to clean the interior of the reservoir. A helpful tip is to use a toothbrush if there are small hard-to-reach spots. Be sure to thoroughly rinse the interior of the fountain to make sure all the soap is gone.
Make sure you get rid of any calcium or plankton by taking the pump apart and washing the inside thoroughly. Soaking it in vinegar for a time will make it easier to wash. Mineral or rain water, versus tap water, is ideal in order to prevent any build-up of chemicals inside the pump.
Finally, be sure to have a quick look at your fountain every day and add water if you notice that the level is depleted. Low water levels can ruin the pump - and you do not want that!