Installation and Maintenance of Garden Fountains
Installation and Maintenance of Garden Fountains Setting up an outdoor wall fountain demands that you bear in mind the dimensions of the space where you are going to place it.
It will need a very strong wall to support its total weight. Areas or walls which are small will require a lightweight fountain. In order for the fountain to have electrical power, a nearby electrical outlet is needed. Most outdoor wall fountains come with simple, step-by-step instructions with respect to the type of fountain. Generally, when you purchase an outdoor wall fountain, it will come in an easy-to-use kit that will include all the information needed to install it properly. The kit will include a submersible pump, the hoses and basin (or reservoir). The basin can usually be concealed among your garden plants if it is not too big. Since outdoor wall fountains need little attention, the only thing left to do is clean it consistently.
It is necessary to replenish the water regularly so that it stays clean. Remember to clear away debris like leaves, twigs or dirt as fast as possible. Make sure that your outdoor wall fountain is protected from freezing winter temperatures. If left outdoors, your pump could split as a result of icy water, so bring it inside during the winter. The bottom line is that if you properly maintain and care for your outdoor fountain, it will bring you joy for years to come.
Keep Your Garden Fountain Clean
Keep Your Garden Fountain Clean Water fountains will last a very long time with regular cleaning and maintenance. Leaves, twigs, and bugs often find their way into fountains, so it is vital to keep yours free from such debris. On top of that, algae can be a challenge, as sunshine hitting the water permits it to form easily. Stir hydrogen peroxide, sea salt, or vinegar into the water to avoid this particular dilemma. Another option is to mix bleach into the water, but this action can sicken wild animals and so should really be avoided.No more than three-four months should really go by without an extensive cleaning of a fountain. Before cleaning, all of the water must be eliminated. Next use mild soap and a soft sponge to clean inside the reservoir. If there are any small grooves, work with a toothbrush to reach each and every spot. Any soap residue left on your fountain can damage it, so be sure it is all rinsed off.
Make sure you get rid of any calcium or plankton by taking the pump apart and cleaning the inside properly. Letting it soak in vinegar for a couple of hours first will make it much easier to clean. Neither rain water nor mineral water contain ingredients that will build up inside the pump, so use either over tap water if possible.
Finally, be sure to have a quick look at your fountain daily and add water if you notice that the level is too low. If the water level falls below the pump’s intake level, it can harm the pump and cause it to burn out - something you do not want to happen!