Archaic Greek Art: Garden Statuary
Archaic Greek Art: Garden Statuary Archaic Greeks were well known for developing the first freestanding statuary; up till then, most carvings were made out of walls and pillars as reliefs. Kouros figures, statues of young, handsome male or female (kore) Greeks, made up the greater part of the sculptures. The kouroi, viewed as by the Greeks to exemplify beauty, had one foot stretched out of a strict forward-facing posture and the male figurines were always undressed, with a strong, strong build. Life-sized versions of the kouroi appeared beginning in 650 BC. The Archaic period was tumultuous for the Greeks as they progressed into more refined forms of federal government and art, and gained more data about the peoples and societies outside of Greece. Throughout this time and other durations of historic tumultuousness, clashes often occurred, among them wars fought amongst city-states such as the Arcadian wars and the Spartan invasion of Samos.Early Water Supply Solutions in Rome
Early Water Supply Solutions in Rome Aqua Anio Vetus, the first raised aqueduct built in Rome, started off providing the many people living in the hills with water in 273 BC, even though they had depended on natural springs up till then. Outside of these aqueducts and springs, wells and rainwater-collecting cisterns were the lone techniques around at the time to supply water to locations of higher elevation.
Keeping Your Large Garden Fountains Clean

A thorough cleaning every three-four months is recommended for garden fountains. To start with you must remove the water. When you have done this, wash inside the water reservoir with a gentle detergent. If there are any small grooves, grab a toothbrush to reach each and every spot. Any soap residue that remains on your fountain can damage it, so be sure it is all rinsed off.
Calcium and fresh water organisms could get inside the pump, so you should really disassemble it to get it truly clean. To make it less strenuous, soak it in vinegar for several hours before cleaning. Build-up can be a big headache, so use mineral or rain water over tap water, when possible, to prevent this dilemma.
And finally, make sure the water level is consistently full in order to keep your fountain operating optimally. Allowing the water level to get too low can result in damage to the pump - and you certainly don't want that!