The Myriad Styles of Water Wall Fountains
The Myriad Styles of Water Wall Fountains
The two types of water features available to you include mounted and stand-alone models. Mounted wall fountains are small and self-contained versions which can be placed on a wall. Fountains of this kind need to be lightweight, therefore, they are usually fabricated from resin (resembling stone) or fiberglass. Large-sized free-standing wall fountains, often referred to as floor fountains, have their basins located on the floor and a flat side leaning on a wall. There are no weight limits on these sorts of cast stone water features.
Custom-made fountains which can be incorporated into a new or existing wall are often recommended by landscaping designers. A professional mason is required to place the water basin against the wall and properly install all the plumbing inside or behind the wall. The wall will need to have a spout or fountain mask incorporated into it. Custom-built wall fountains contribute to a unified look because they become part of the scenery rather than look like a later addition.
Keep Your Wall fountain Tidy
Keep Your Wall fountain Tidy Water fountains will last a long time with scheduled cleaning and maintenance. A typical problem with fountains is that they tend to gather dirt and debris, so it is vital that you keep it free from this. Another factor is that water that is exposed to sunlight is prone to growing algae. Mix hydrogen peroxide, sea salt, or vinegar into the water to avoid this particular issue. Bleach can also be dissolved into the water, however this is not an ideal option as it can sicken birds or other animals.No more than three-four months should go by without an extensive cleansing of a fountain. Before you can start cleaning it you must empty out all of the water. Then use a soft cloth and gentle cleanser to scrub the inside. A useful tip is to use a toothbrush if there are tiny hard-to-reach spots. Do not leave any soap residue inside of or on the fountain.
Make sure you get rid of any calcium or plankton by taking the pump apart and cleaning the inside properly. You might want to let it soak in vinegar for a few hours to make it quicker to scrub. If you want to minimize build-up in your fountain, use rain water or mineral water rather than tap water, as these don’t contain any elements that will stick to the inside of the pump.
Lastly, make sure your fountain is always full by looking at it every day - this will keep it in tip-top condition. Allowing the water level to get too low can result in damage to the pump - and you certainly don't want that!