Setting Up and Maintaining Large Garden Fountains
Setting Up and Maintaining Large Garden Fountains A very important first step is to consider the proportions of the outdoor wall fountain with regards to the area you have available for it. It will need a very strong wall to support its total weight. Therefore for smaller areas or walls, a light feature is going to be more suitable.
Generally, when you purchase an outdoor wall fountain, it will come in an easy-to-use kit that will include all the information needed to install it correctly. The kit will include a submersible pump, the hoses and basin (or reservoir). Depending on its size, the basin can normally be hidden quite easily amongst the plants. Once your wall fountain is in place, all that is required is regular cleaning and some light maintenance.
It is necessary to replenish the water consistently so that it stays clean. It is important to promptly remove debris such as leaves, twigs or other dreck. Make sure that your outdoor wall fountain is protected from bitterly cold winter temperatures. In order to avoid any damage, such as cracking, from freezing water during the cold winter season, relocate your pump indoors. All in all, an outdoor wall fountain can last for any number of years with the right upkeep and care.
Back Story of Garden Water Fountains
Back Story of Garden Water Fountains
The One Cleaning Solution to NEVER Use On Your Wall Water Fountains
The One Cleaning Solution to NEVER Use On Your Wall Water Fountains To ensure that water fountains last a while, it is important to practice regular maintenance. A typical problem with fountains is that they tend to collect dirt and debris, so it is vital that you keep it free from this. Additionally, anywhere light from the sun mixes with still water, algae can appear. Either sea salt, hydrogen peroxide, or vinegar can be mixed into the water to prevent this issue. Some people opt for pouring bleach into the water, but the problem is that it harms wildlife - so it should be avoided.Experts recommend that the typical garden fountain undergoes a thorough cleaning every 3-4 months. The initial task is to get rid of all of the water. Then use a soft rag and mild cleanser to scrub the inside. If there is intricate artwork, you might need to use a toothbrush for those hard-to-reach areas. Be sure to completely rinse the inner surface of the fountain to make sure all the soap is gone.
Make sure you get rid of any calcium or plankton by taking the pump apart and cleaning the inside thoroughly. Letting it soak in vinegar for several hours first will make it much easier to clean. Neither rain water nor mineral water contain substances that will build up inside the pump, so use either over tap water if possible.
Finally, be sure to have a quick look at your fountain daily and add water if you notice that the level is too low. Low water levels can ruin the pump - and you do not want that!