Fountains Found in Historical Documents
Fountains Found in Historical Documents The water from rivers and other sources was initially supplied to the inhabitants of nearby towns and municipalities via water fountains, whose purpose was largely practical, not aesthetic. In the days before electricity, the spray of fountains was powered by gravity exclusively, often using an aqueduct or water supply located far away in the surrounding mountains. The splendor and spectacle of fountains make them ideal for traditional memorials. If you saw the earliest fountains, you probably would not recognize them as fountains. Designed for drinking water and ceremonial purposes, the very first fountains were simple carved stone basins. Natural stone basins are believed to have been first utilized around 2000 BC. Gravity was the power source that operated the earliest water fountains. Located near aqueducts or springs, the practical public water fountains provided the local residents with fresh drinking water. Fountains with elaborate decoration began to show up in Rome in about 6 B.C., commonly gods and wildlife, made with stone or copper-base alloy. The City of Rome had an intricate system of aqueducts that delivered the water for the many fountains that were located throughout the city.Keep Your Garden Wall Fountain Tidy
Keep Your Garden Wall Fountain Tidy In order to ensure that water fountains last a long time, it is vital to practice regular maintenance. Leaves, twigs, and bugs very often find their way into fountains, so it is essential to keep yours free from such things. Another factor is that water that is subjected to sunlight is prone to growing algae. Either sea salt, hydrogen peroxide, or vinegar can be mixed into the water to avoid this problem. Another option is to mix bleach into the water, but this action can sicken wild animals and so should really be avoided. A complete cleaning every 3-4 months is best for garden fountains. Before you start cleaning, all the water must be taken out. When you have done this, scour inside the water reservoir with a gentle detergent. A helpful tip is to use a toothbrush if there are little hard-to-reach spots. Make sure all the soap is totally rinsed off.
It is highly advised taking the pump apart to better clean the inside and eliminate any plankton or calcium. You might want to let it soak in vinegar for a few hours to make it quicker to scrub. Build-up can be a big headache, so use mineral or rain water over tap water, when possible, to prevent this dilemma.
Finally, be sure to have a quick look at your fountain daily and add water if you notice that the level is too low. If the water level drops below the pump’s intake level, it can hurt the pump and cause it to burn out - something you don't want to happen!