Fountains And Their Use In Ancient Minoa
Fountains And Their Use In Ancient Minoa On the Greek island of Crete, digs have discovered channels of multiple types. They were used for water supply as well as removal of storm water and wastewater. Rock and terracotta were the ingredients of choice for these conduits. There were terracotta pipes, both circular and rectangular as well as canals made from the same materials. There are a couple of examples of Minoan clay conduits, those with a shortened cone form and a U-shape which have not been seen in any civilization ever since. The water provision at Knossos Palace was managed with a system of clay piping that was located beneath the floor, at depths starting from a couple of centimeters to several meters. The water pipes also had other functions including collecting water and diverting it to a centralized area for storage.
Anglo-Saxon Gardens at the Time of the Norman Conquest

Keeping Your Water Wall Fountain Tidy
Keeping Your Water Wall Fountain Tidy Water fountains will keep working a very long time with regular cleaning and maintenance. A typical problem with fountains is that they tend to collect dirt and debris, so it is essential that you keep it free from this. Additionally, anywhere light from the sun comes in contact with still water, algae can form. To stay clear of this, take vinegar, hydrogen peroxide, or sea salt and add straight into the water. Another option is to blend bleach into the water, but this action can hurt wild animals and so should really be avoided.Experts advise that the typical garden fountain undergoes a thorough scrubbing every 3-4 months. First off you must empty the water. Then use a soft towel and mild cleanser to scrub the inside. A good tip is to use a toothbrush if there are small hard-to-reach spots. Be sure to carefully rinse the inside of the fountain to make sure all the soap is gone.
Some organisms and calcium deposits may get inside the pump, so it is recommended to take it apart and clean it thoroughly. Letting it soak in vinegar for a few hours first will make it much easier to clean. Mineral or rain water, versus tap water, is ideal in order to avoid any build-up of chemicals inside the pump.
And finally, make sure the water level is always full in order to keep your fountain working optimally. If the water level falls below the pump’s intake level, it can hurt the pump and cause it to burn out - something you don't want to happen!