The Original Garden Water Features
The Original Garden Water Features As initially conceived, fountains were designed to be practical, directing water from streams or reservoirs to the residents of cities and settlements, where the water could be utilized for cooking food, cleaning, and drinking. To produce water flow through a fountain until the end of the 1800’s, and produce a jet of water, demanded gravity and a water source such as a spring or lake, located higher than the fountain. Striking and spectacular, large water fountains have been designed as memorials in many societies. When you enjoy a fountain nowadays, that is definitely not what the very first water fountains looked like. Created for drinking water and ceremonial purposes, the initial fountains were simple carved stone basins. The first stone basins are presumed to be from about 2000 BC. The earliest civilizations that made use of fountains depended on gravity to push water through spigots. Drinking water was supplied by public fountains, long before fountains became elaborate public statues, as beautiful as they are practical.
Creatures, Gods, and spectral figures dominated the early ornate Roman fountains, starting to show up in about 6 B.C.. The people of Rome had an intricate system of aqueducts that supplied the water for the many fountains that were located throughout the city.
Keeping Your Landscape Fountain Tidy
Keeping Your Landscape Fountain Tidy Appropriate care and regular maintenance are important to the longevity of water fountains.
A common issue with fountains is that they tend to gather dirt and debris, so it is essential that you keep it free from this. Another factor is that water that is subjected to sunlight is prone to growing algae. Either sea salt, hydrogen peroxide, or vinegar can be dissolved into the water to eliminate this problem. Some people opt for putting bleach into the water, but the downside is that it harms wildlife - so it should be avoided. Every three-four months, garden fountains should undergo a good cleaning. The first task is to get rid of all the water. Then use a soft rag and mild cleanser to scrub the inside. If there is intricate artwork, you might need to use a toothbrush for those hard-to-reach areas. Do not leave any soap residue in or on the fountain.
It is highly advised taking the pump apart to better clean the inside and get rid of any plankton or calcium. You might want to let it soak in vinegar for a few hours to make it much less difficult to scrub. Build-up can be a big problem, so use mineral or rain water over tap water, when possible, to reduce this dilemma.
And finally, make sure the water level is always full in order to keep your fountain operating smoothly. Low water levels can damage the pump - and you do not want that!