The One Cleaning Solution to NEVER Use On Your Fountains

Every three-four months, garden fountains should go through a good cleaning. Before you can start washing it you need to drain out all of the water. Then use mild soap and a soft sponge to clean inside the reservoir. If there are any small grooves, work with a toothbrush to reach each and every spot. Any soap residue left on your fountain can harm it, so be sure it is all rinsed off.

It is highly suggested taking the pump apart to better clean the inside and remove any plankton or calcium. Letting it soak in vinegar for a couple of hours first will make it alot easier to clean. If you want to eliminate build-up in your fountain, use rain water or mineral water versus tap water, as these don’t contain any elements that might stick to the inside of the pump.

One final tip for keeping your fountain in top working condition is to check the water level every day and make sure it is full. Allowing the water to reach below the pump’s intake level, can cause major damage and even make the pump burn out - an undesired outcome!

Pick from Many Exterior Wall Fountain Styles

There are two distinct sorts of fountains you can buy: mounted and free-standing. Mounted wall fountains are little and self-contained versions which can be hung on a wall. Ordinarily made of resin (to resemble stone) or fiber glass, these kinds of fountains are lightweight and easy to hang. Stand-alone fountains, often referred to as floor fountains, are sizable, have a basin located on the ground and a smooth side which leans against a wall. There are no weight constraints on these sorts of cast stone water features.

Many qualified landscapers favor custom-built fountains which can be incorporated into a brand-new wall or an existing one. Employing an expert mason is your best option to build the basin and install the necessary plumbing. It is also essential to add a spout or fountain mask to build it into the wall. The unified look provided by custom-made wall fountains make them appear to be part of the landscape instead of an afterthought.

Contemporary Garden Decor: Large Outdoor Water Fountains and their Roots

From the beginning, outdoor fountains were simply there to serve as functional elements. Residents of urban areas, townships and small towns utilized them as a source of drinking water and a place to wash up, which meant that fountains had to be linked to nearby aqueduct or spring. Up until the nineteenth, fountains had to be more elevated and closer to a water supply, including aqueducts and reservoirs, in order to benefit from gravity which fed the fountains. Serving as an element of adornment and celebration, fountains also generated clean, fresh drinking water. Bronze or stone masks of animals and heroes were commonly seen on Roman fountains. During the Middle Ages, Muslim and Moorish garden designers included fountains in their designs to mimic the gardens of paradise. To show his dominance over nature, French King Louis XIV included fountains in the Garden of Versailles. The Romans of the 17th and 18th centuries created baroque decorative fountains to exalt the Popes who commissioned them as well as to mark the location where the restored Roman aqueducts entered the city.

Since indoor plumbing became the norm of the day for fresh, drinking water, by the end of the 19th century urban fountains were no longer needed for this purpose and they became purely decorative. The introduction of unique water effects and the recycling of water were two things made possible by swapping gravity with mechanical pumps.

Contemporary fountains are used to adorn public spaces, honor individuals or events, and enrich recreational and entertainment events.