Select from Any Number of Outdoor Wall Fountain Styles

There are two distinct styles of fountains you can buy: mounted and stand-alone. Small, self-contained mounted wall fountains can be hung on any surface. Wall fountains made of resin ( similar to stone) or fiberglass are normally lightweight so they can be easily hung. Sizable free-standing wall fountains, often referred to as floor fountains, have their basins located on the floor and a smooth side leaning on a wall. Typically made of cast stone, these water features have no weight restrictions.
Landscape professionals often propose a individualized fountain for a brand new or existing wall. A expert mason is necessary to install the water basin against the wall and correctly install all the plumbing inside or behind the wall. The wall will have to have a spout or fountain mask incorporated into it. A custom-built wall fountain blends into the landscape instead of standing out because it was a later addition, which contributes to a cohesive look.
The One Cleaning Solution to NEVER Use On Your Large Outdoor Fountains
The One Cleaning Solution to NEVER Use On Your Large Outdoor Fountains It is essential to carefully maintain water fountains for them to function properly. Leaves, twigs, and bugs often find their way into fountains, so it is important to keep yours free from such things. Also, algae tends to build up any place natural light meets water.
An extensive cleaning every three-four months is recommended for garden fountains. Before you can start cleaning it you need to drain out all of the water. Then use a soft towel and gentle cleanser to scrub the inside. A good tip is to use a toothbrush if there are little hard-to-reach spots. Any soap residue that remains on your fountain can damage it, so be sure it is all rinsed off.
Make sure you get rid of any calcium or plankton by taking the pump apart and washing the inside carefully. You might want to let it soak in vinegar for a few hours to make it quicker to scrub. If you want to minimize build-up in your fountain, use rain water or mineral water rather than tap water, as these don’t contain any components that will stick to the inside of the pump.
Finally, be sure to have a quick look at your fountain every day and add water if you see that the level is too low. Permitting the water level to get too low can result in damage to the pump - and you certainly don't want that!