The Myriad Reasons to Add a Wall Fountain
The Myriad Reasons to Add a Wall Fountain The area outside your residence can be polished up by adding a wall or a garden fountain to your landscaping or garden project.
Contemporary artists and fountain builders alike use historical fountains and water features to shape their creations. As such, the impact of integrating one of these to your home decor bridges it to past times. In addition to the positive attributes of garden fountains, they also produce water and moisture which goes into the air, thereby, drawing in birds as well as other creatures and harmonizing the environment. For example, birds lured by a fountain or birdbath can be useful because they fend off irritating flying insects. Spouting or cascading fountains are not the best choice for a small garden since they require a great deal of space. You can choose to install a stand-alone fountain with a flat back and an attached basin propped against a fence or wall in your backyard, or a wall-mounted type which is self-contained and hung from a wall. A water feature can be added to an existing wall if you include some sort of fountain mask as well as a basin to collect the water at the bottom. Be sure to hire a specialist for this type of job since it is better not to do it yourself due to the intricate plumbing and masonry work needed.
Keeping Your Landscape Fountain Clean
Keeping Your Landscape Fountain Clean Appropriate care and regular maintenance are important to the longevity of water fountains. A common problem with fountains is that they tend to accumulate dirt and debris, so it is essential that you keep it free from this. Additionally, anywhere light from the sun comes in contact with still water, algae can appear. To avoid this, there are some simple ingredients that can be poured into the water, such as vinegar, sea salt, or hydrogen peroxide. Some people opt for putting bleach into the water, but the drawback is that it harms wildlife - so it should be avoided. Experts recommend that the typical garden fountain undergoes a thorough scouring every 3-4 months. Before you can start washing it you need to empty out all of the water. Then use mild soap and a soft sponge to clean the interior of the reservoir. If there is delicate artwork, you might need to use a toothbrush for those hard-to-reach areas. Any soap residue remaining on your fountain can damage it, so be sure it is all rinsed off.
It is highly recommended taking the pump apart to better clean the inside and remove any plankton or calcium. Soaking it in vinegar for a while will make it easier to clean. Mineral or rain water, versus tap water, is ideal in order to prevent any build-up of chemicals inside the pump.
One final trick for keeping your fountain in top working order is to check the water level every day and make sure it is full. If the water level slides below the pump’s intake level, it can damage the pump and cause it to burn out - something you do not want to happen!